18
Freedom SW Installation Guide
Planning Preparations
Unpacking and Inspecting the Freedom SW Inverter/Charger
To unpack and inspect:
1.
Unpack the unit and check the materials list. If anything is missing
from the shipping box, contact Xantrex Customer Service. See
“Contact Information” on page i.
2.
Record the serial number of the Freedom SW and other purchase
information in the Warranty section of the
Freedom SW Sine Wave
Inverter/Charger Owner’s Guide
. You will be asked for this product
information if you need to call Xantrex Customer Service.
3.
Save your purchase receipt to use as proof-of-purchase. This receipt is
required if the inverter/charger should need warranty service.
4.
Save the original shipping carton and packing materials. If the
inverter/charger needs to be returned for service, it should be shipped
in the original carton. Packing the Freedom SW in the original
shipping carton is also a good way to protect the inverter/charger if it
ever needs to be moved.
HEAVY LOAD
The Freedom SW Inverter/Charger is heavy (see “Inverter/Charger
Physical Specifications” on page 52)
.
The unit is too heavy for one
person to safely lift and mount. Xantrex recommends that two people lift
and mount the unit. Always use proper lifting techniques during
installation to prevent personal injury.
Failure to follow these instructions can result in minor or moderate
injury.
IMPORTANT:
Keep the carton and packing material in case you need to
return the Freedom SW for servicing.
Freedom SW 3K2K InvChg Install Guide.book Page 18 Wednesday, October 12, 2011 4:40 PM