![background image](http://html.mh-extra.com/html/xantrex/communications-gateway/communications-gateway_installation-manual_881372041.webp)
Using the Configuration Web Page
975-0330-01-01
3–11
If your home router cannot supply addresses to devices on the network, or
if you want the Gateway to have a specific address, clear the Get Address
Dynamically check box and enter a static IP address here.
Subnet Mask
Enter the bits in the IP address which are used to refer to
devices on the local network.
If your home router cannot supply addresses to devices on the network, or
if you want the Gateway to have a specific address, clear the Get Address
Dynamically check box and enter a mask here.
Domain Name
Enter a name for the Gateway and the networked power
system.
This is the name your power system uses on the network to identify itself
to other computers. It is included in all email sent from the Gateway. The
default domain name is POWERSYSTEM. This name also appears in the
list of auto-detected IP addresses on the Solar Monitor Widget.
After clicking Save and Apply, the Xantrex Gateway reboots with new
settings and does not reply for about a minute. This configuration page
will attempt to reload with the IP address you set. If the configuration
page does not reload, re-enter the IP address of the Gateway in your web
browser’s address bar.
Содержание Communications gateway
Страница 1: ...Communications Gateway Installation Guide Communications Gateway Inverter Modbus RS485 ...
Страница 2: ......
Страница 3: ...Communications Gateway Installation Guide ...
Страница 69: ......