![background image](http://html.mh-extra.com/html/xantrex/communications-gateway/communications-gateway_installation-manual_881372044.webp)
Configuration
3–14
975-0330-01-01
Encryption Key.
Configures the encryption key used in the wireless
network. Set this value to be the same as your existing home network.
Enter the key as hexadecimal numbers if the hex Key Type was selected
above. Enter the key as a string of characters if the passphrase Key Type
was selected above. A passphrase of more than 20 characters is
recommended. Spaces and punctuation characters are permitted.
Configuring Network Time
You can configure the Gateway to use a network time protocol (NTP)
server on the Internet. Network time read from the Internet is very
accurate.
Universal Coordinated Time (UTC, sometimes referred to as Greenwich
Mean Time or GMT) is the default time provided by NTP servers. When
using an NTP server, you must enter a Time Zone Offset to shift UTC to
your local time.
You can also configure the Gateway to read time from a computer on your
local network if the computer has been configured as a NTP server. It is
best to use a computer on your local network (if available) so that the
Gateway and all computers on the network are synchronized.
If you are unable to contact an NTP server, or are not connected to the
Internet, you can set the date and time manually using Local Date and
Local Time. Local Date and Local Time use the Gateway internal clock as
a reference, which is not as accurate as time from an NTP server.
Time Zone Offset
Sets the local time zone offset from UTC/GMT.
Enter the number of hours your local time is offset from UTC/GMT. For
locations west of Greenwich, England, the offset should be negative. For
locations east of Greenwich, the offset should be positive. Adjust for
daylight savings time if it applies in your area.
When updating the Time Zone Offset and no other Network Time
settings, select
Update Offset Only
before changing the Time Zone
Offset.
Use Local Settings
When selected, Local Date and Local Time settings
become available. When cleared, you can configure the Gateway to use a
network time server.
Important:
Setting an incorrect Network Name (SSID), security mode, or
encryption key causes the Gateway to lose its connection with the network. If the
Gateway has lost its connection in this manner, it must be reset to factory default
settings.
Содержание Communications gateway
Страница 1: ...Communications Gateway Installation Guide Communications Gateway Inverter Modbus RS485 ...
Страница 2: ......
Страница 3: ...Communications Gateway Installation Guide ...
Страница 69: ......