![background image](http://html1.mh-extra.com/html/xantech/xmusicwp/xmusicwp_user-manual_3167433015.webp)
11
USER GUIDE
Page
REMOTE CONTROL USE IN A MULTIROOM
SYSTEM
Your Audio Server remote control can be configured so
that every button press indicates to the system which
output is to be controlled. This means that whenever
infrared is received by the Audio Server the TV display
will automatically switch to controlling the appropriate
output.
To configure the remote with a default output
Press the
Audio Server
and
O
Select
keys
simultaneously; hold them down for 1 second.
The
Audio Server
key will remain lit for 20 seconds; the
configuration process must be completed during this
time.
Enter the 3 digit code corresponding to the output
you would like to control (valid configurations are
listed in
Appendix A
). For example, to set output 2
as your default output press:
0, 0, 2
Press the
Audio Server
button again.
The
Audio Server
button will blink twice to indicate
that the configuration has been accepted. If the
Audio
Server
button does not blink twice begin the process
again, taking care to enter the number correctly.
Pressing any navigation key on the remote should
now cause the Audio Server to switch to the correct
output. The remote control can still be used to control
a different audio output in the normal way; pressing the
Home Output
key will return it to controlling the default
output.
•
•
•
Содержание XMUSICWP
Страница 1: ...a d c e f h g USER GUIDE...
Страница 4: ......
Страница 50: ......
Страница 51: ......