![background image](http://html1.mh-extra.com/html/xantech/xmusicwp/xmusicwp_user-manual_3167433016.webp)
12
USER GUIDE
Page
4
CONNECTING YOUR AUDIO
SERVER
This chapter describes the necessary connections
that must be made in order for the Audio Server to
correctly function. In most cases connection and
configuration of an Audio Server takes place as part of
a home installation and your dealer or installer will be
responsible for this. However, should you choose to
install your Audio Server yourself, or make changes to
an existing installation, follow the instructions below to
establish the necessary connections.
BASIC CONNECTIONS
The diagram below illustrates the basic connections
required to use your Audio Server.
Note
: Do not make any connections to the Audio Server
while the power supply is connected and switched on.
Connecting the Modem
Connect the supplied telephone lead to a standard
analog telephone socket. Connect the other end of
this lead to the socket marked
Modem
on the back
panel of the Audio Server.
Connecting the Audio
Connect the red plug of the supplied audio lead
to the red
Analog Out 1
socket on the back of the
Audio Server. Connect the adjacent white plug to
the white
Analog Out 1
socket on the Audio Server.
Connect the other end of this cable to the AUX or
CD inputs on your stereo amplifier. In the same way
connect the other
Analog Out
connectors to other
stereo amplifiers as appropriate.
•
•
Connecting the Video
Connect the yellow plug of the supplied composite
video lead to the yellow
Video Out
socket of the
Audio Server. For most TVs connect the other end
of this lead to the ext. 1 or 2 socket on the rear of
your TV. For some TVs it may be necessary to use a
Scart plug. In this case connect the other end of this
lead to the yellow socket on the Scart plug. Now
connect the Scart plug to the Scart socket in the rear
of the TV.
Connecting the Power
Connect the supplied power cord to your mains
supply.
Note
: be sure to use the correct power cord
for your country.
Switching On
Switch on your Audio Server using the button
labelled
STANDBY
on the front panel.
Switch on your television. Select the appropriate
video channel to view the Audio Server TV User
Interface display.
Your Audio Server is now connected ready for use.
To take advantage of the Audio Server’s multiroom
functionality, refer to the section overleaf entitled
Using
Your Audio Server in a Multiroom System
.
Note
: In order to connect to the Internet in the below
example it will be necessary to configure the Audio
Server’s settings to connect using a Modem. See the
Quick Start Guide
on page 4 for more information.
•
•
•
•
Содержание XMUSICWP
Страница 1: ...a d c e f h g USER GUIDE...
Страница 4: ......
Страница 50: ......
Страница 51: ......