X2E XORAYA Z7, Руководство пользователя

Страница: 83 / 190

U
SER
M
ANUAL
X
ORAYA
S
UITE
83
A2L configuration:
 Click Open A2L file (3) and select the description file that corresponds
with the ECU.

The X
ORAYA
Suite reads the A2L file and configures the CCP
connection accordingly.

If Overwrite alias with ECU name under Settings (6) is activated,
Alias is also changed.

If supported by the A2L file, the X
ORAYA
Suite automatically runs an
EPK version check with the ECU and displays the result via the
Traffic light for the EPK check (4) .
You can also execute this check manually via the EPK button.
Levels of the Traffic light for the EPK check (4) :
 green check successful
 yellow check not possible

red check not successful
Signal configuration:
 Click Open selection file (5) and select a suitable XML, CFG or LAB file.
or
 Click Signal selection and select the signals manually. (

Filter)

The X
ORAYA
Suite calculates the expected percentage of the bus load
increase.
The result evaluation is displayed via the Traffic light for the bus
load (7) .
Configure the levels of the Traffic light for the bus load (7) :
 Right-click on the traffic light and then on Edit traffic light settings for
this interface type .
 Specify the percentage limit between green and yellow (standard: 50).
 Specify the percentage limit between yellow and red (standard: 80).
 Click OK .