QUICK START GUIDE
1
2
3
4
A:
UNLOCK THE LATCHES.
B:
OPEN THE DATATRAP II™.
INSTALL THE DATATRAP II™ SOFTWARE
ON THE COMPUTER.
A
A
B
TURN ON THE DATATRAP II™ BY
PRESSING THE POWER BUTTON
FOR 2 SECONDS. THE LED
SCREEN WILL TURN ON AND THE
STATUS LIGHT WILL FLASH.
PRESS THE INFO BUTTON AND THE DISPLAY WILL
SHOW THE BATTERY LEVEL REMAINING AS SHOWN
ABOVE. IF THE BATTERY NEEDS CHARGING, PLEASE
SEE STEP 5, ELSE GO TO STEP 6.
PROGRAM THE DATATRAP II™ BY
SELECTING CHANGE SETTINGS AND
NUMBER OF TESTS OPTION AND
CLICKING NEXT.
TURN OFF THE DATATRAP II™ BY PRESSING
THE POWER BUTTON AND THEN CONNECT
THE BATTERY CHARGER TO THE DC IN PORT.
THE DISPLAY ON THE DATATRAP II™ WILL
DISPLAY CHARGING.
WITH THE DATATRAP II™ POWERED ON,
CONNECT THE USB COMMUNICATIONS CABLE
TO THE DATATRAP II™. THEN CONNECT THE
OTHER END OF THE USB COMMUNICATIONS
CABLE TO THE PC WHERE THE SOFTWARE WAS
INSTALLED.
START THE SOFTWARE FROM
START / PROGRAMS / MREL / DATATRAPII
AND CLICK ON
PROGRAM DATATRAPII
INSTALL USB DRIVERS FOR THE
DATATRAP II™ FROM
MyDocuments/MREL/DataTrapII/driver
FOR MORE HELP, GO TO
www.mrel.ca/usb/dt2
5
6
7
8
9
CHOOSE THE TOTAL NUMBER OF TESTS
MORE TESTS = LESS TIME PER TEST
CHOOSE THE NUMBER OF CHANNELS YOU
REQUIRE BY TURNING THEM OFF OR ON.
10
11
SET THE
RECORDING RATE
FOR EACH CHANNEL.
SET THE TRIGGER TYPE FOR EACH CHANNEL.
WHEN ALL CHANNELS ARE SET, PRESS NEXT.
12
13
