X2E XORAYA Z7, Руководство пользователя

Страница: 12 / 190

U
SER
M
ANUAL
S
AFETY AND WARRANTY
12
2.2 General safety instructions
DANGER
Electric shock caused by damage to components
Any damage to the X
ORAYA
Z7, power source or connection
cable may cause an electric shock.
 Switch on the X
ORAYA
Z7 only if all components
appear undamaged.
 Only commission the X
ORAYA
Z7 after a proper
installation or repair.
 Check the connecting cable regularly for defects to
prevent damage to the power source.
 Always install the X
ORAYA
Z7 in de-energised status.
WARNING
Defects influencing the environment
The incorrect X
ORAYA
Z7 configuration can lead to the
temporary or permanent functional failure of connected
vehicles.
Connected vehicles being operated on public roads bear
an increased risk of injury and damage.
 If available, use configuration templates provided by
the vehicle manufacturer.
 Use preferably the passive recording modes of the
interfaces.
CAUTION
Device damage due to short circuit
Bent connector pins pose a short circuit risk. This can lead
to abnormal behaviour or destruction of the X
ORAYA
Z7.
Likewise, devices connected to the measurement setup
may be also compromised.
 Make sure that connector pins are not bent.
 Check the X
ORAYA
Z7 regularly for any deficiencies.
CAUTION
Device damage due to electrostatic discharge
Electronic components can be destroyed by electrostatic
discharge.
 Avoid touching connectors and connector pins.
 Ground yourself before carrying the X
ORAYA
Z7 in
your hands.
 Operate the X
ORAYA
Z7 in an ESD-compliant
environment.