X2E XORAYA Z7, Руководство пользователя

Страница: 90 / 190

U
SER
M
ANUAL
X
ORAYA
S
UITE
90
PROTOCOL_XCP_MASTER
PROTOCOL_XCP_SPY
PROTOCOL_XCP_ON_CAN
PROTOCOL_XCP_ON_FLEXRAY
The available modes (Master, Spy) and physical buses
(CAN, FlexRay) depend on the activation of these
licences.
Check in category Versions of system settings to verify
which licences are activated for your datalogger.
(

Versions)
Setting Description Default
Enable Turn on logging for this channel Off
Spy XCP
traffic XCP mode
On : Spy (external communication is monitored,
no sending)
Off : Master
Off
Alias Freely selectable channel name xcp#
Bus ID Additional ID for subsequent evaluation
Prevent Sleep
Mode Datalogger will not go into sleep mode as long as
there is activity on this channel Off
Source Physical CAN or FlexRay channel to be used Can_1 (can1)
A2L file Description file, which is suitable for the ECU and
is loaded to configure the XCP connection
Transport
layer Selection if the A2L contains multiple transport
layer descriptions
Selection file Signal filter file (XML, CFG or LAB), which contains
a (pre-)selection of the signals to be monitored
Retry max Maximum number of retries after unsuccessful
connection attempt 3
Data timeout No data received for this period of time (in s)
leads to an error
10