X-Rite VeriColor Spectro Скачать руководство пользователя страница 20

Страница: 20 / 68

V E R I C O L O R

S P E C T R O

VeriColor Spectro System Operation

Configuring the Software Options

The software should be configured before proceeding with the color standards setup and

sample measurements.

Administrative (Admin) Setup

Administrative setup is used to configure the General, Verify, Lookup, Compare, and Monitor

options. The Admin dialog is accessed by clicking

Admin

menu at the top of the application.

General Screen Page

The general screen is used to establish serial communications, select the language the
application will run in, and setup password protection.

Click in the

COM port

field and enter an appropriate port number, or use the up/down

arrows to select the connection port. The default port is one.

Click in the

Set White Verification …

field and select the number of days that pass

before you would like to be reminded to perform a verification. Use the up/down arrows

to select the number of days, ranging from 1 to 30. The default number is 1.

Click one of the

Baud Rate

buttons to select the desired baud rate. Once selected, the

instrument and software will both be configured.

The default baud rate is 115200. You

can click the

Test instrument

button to check the baud rate selected. If the connection

is fine, OK should appear in a green box below the instrument field.

Select the

Language

that you would like that application to run in by clicking the

appropriate option. The default language is set to English. If the desired language is not

available, you can use the Language Tool option located in the File menu to localize the
application to a different language. Refer to the Language Tool later in this section.

NOTE:

The

Allow Editing Language

option must be checked before the Language Tool

item appears in the File menu. The default is un-checked.

Содержание VeriColor Spectro





































































Результаты поиска

Содержание VeriColor Spectro

Отзывы:

Похожие инструкции для VeriColor Spectro

Бренды по названию

Популярные бренды

X-Rite VeriColor Spectro, Руководство по установке и эксплуатации

Результаты поиска

Содержание VeriColor Spectro

Отзывы:

Похожие инструкции для VeriColor Spectro

Бренды по названию

Популярные бренды