DVD-688 Controller
DVD-688 Controller
6.3 Delete
6.3 Delete
When the last music track stored in hard drive is not the one
When the last music track stored in hard drive is not the one you wish to keep, switch to
you wish to keep, switch to
“delete” function and press GO switch to delete it. You may always use this function to
“delete” function and press GO switch to delete it. You may always use this function to
delete the last track stored in the current partition of
delete the last track stored in the current partition of hard drive.
hard drive.
6.4 Clear
6.4 Clear
This function clears the master data stored in the current partition of hard drive.
This function clears the master data stored in the current partition of hard drive. When
When
you want to EDIT a new collection of songs, you must run this function first to
you want to EDIT a new collection of songs, you must run this function first to clear the
clear the
current partition of hard drive. Perform this function by pressing GO switch at
current partition of hard drive. Perform this function by pressing GO switch at “Clear”
“Clear”
function and LCD will show: “Master cleared”.
function and LCD will show: “Master cleared”.
6.5
6.5 Disc
Disc Info
Info
By using this function, users can get information from the media discs that loaded in the
By using this function, users can get information from the media discs that loaded in the
writers, such as max. write speed, capacity, etc.
writers, such as max. write speed, capacity, etc.
6.
6.6
6 Show
Show Drive
Drive
This setting shows the devices connected to the
This setting shows the devices connected to the duplicator such as CD/ DVD-ROM,
duplicator such as CD/ DVD-ROM,
CD/DVD writers and hard drive,
CD/DVD writers and hard drive, etc. It also displays the
etc. It also displays the devices’ firmwa
devices’ firmware version that
re version that
sometimes provides a useful hint for trouble shooting or for future upgrade. It is
sometimes provides a useful hint for trouble shooting or for future upgrade. It is
suggested to use writers with SAME
suggested to use writers with SAME firmware version to avoid inconsistency
firmware version to avoid inconsistency. The
. The
display is as below:
display is as below:
DVD-ROM
DVD-ROM
[*]
[*] A
AT
TA1.0
1.
A1.0
1.22
22
[Q]
[Q]
It means the first slot (IDE#1) on controller board is connected with DVD-ROM that
It means the first slot (IDE#1) on controller board is connected with DVD-ROM that is
is
set to master mode (0) and its firmware version is 1.22.
set to master mode (0) and its firmware version is 1.22.
A
AT
TAPI
API
DVD+RW 4X4X
DVD+RW 4X4X
[*]
[*] A
AT
TA7.1
A7.1
B1HY
B1HY
[Q]
[Q]
It means the 7
It means the 7
th
th
slot (IDE#7) on
slot (IDE#7) on the controller board
the controller board is connected with AT
is connected with ATAPI device
API device
DVD+RW writer that is set to
DVD+RW writer that is set to slave mode (1) and its firmware version is
slave mode (1) and its firmware version is B1HY
B1HY. The first
. The first
digit after A
digit after AT
TA is slot number and the digit
A is slot number and the digit behinds the dot is master
behinds the dot is master and slave mode, 0
and slave mode, 0
for master and 1 for slave.
for master and 1 for slave.
6.
6.7
7 Bur
Bur n
n in
in
This function is a
This function is a burn-in test function. It
burn-in test function. It will run the
will run the emulate write function continuously
emulate write function continuously..
Between each cycle of emulate write, the blank discs in writers will be ejected
Between each cycle of emulate write, the blank discs in writers will be ejected
automatically and re-insert again for continuous testing. There is no real writing on the
automatically and re-insert again for continuous testing. There is no real writing on the
Page 26 of 33
Page 26 of 33
