DVD-688 Controller
DVD-688 Controller
installed in the system. Default setting is “MAX” which will use the highest CD writing
installed in the system. Default setting is “MAX” which will use the highest CD writing
speed. Sometimes maximum writing speed will cause higher failure rate that may be
speed. Sometimes maximum writing speed will cause higher failure rate that may be
due to poor CD quality or unstable CD writing in high speed. Under this circumstance,
due to poor CD quality or unstable CD writing in high speed. Under this circumstance,
please lower the writing speed under this setting to get higher successful rate. On the
please lower the writing speed under this setting to get higher successful rate. On the
contrary
contrary, lower value setting
, lower value setting will make the writi
will make the writing speed slower and confuse you as a
ng speed slower and confuse you as a
problematic duplicator. Press MODE to change the setting and GO
problematic duplicator. Press MODE to change the setting and GO to exit.
to exit.
6.1
6.1.25
.25 HD
HD to DVD W
to DVD Wri
rite Speed (
te Speed (if HDD inst
if HDD inst alled)
alled)
This setting controls the maximum DVD writing speed of writers when the hard drive is
This setting controls the maximum DVD writing speed of writers when the hard drive is
installed in the system. Default setting is “MAX” which will use the highest DVD writing
installed in the system. Default setting is “MAX” which will use the highest DVD writing
speed. Sometimes maximum writing speed will cause higher failure rate that may be
speed. Sometimes maximum writing speed will cause higher failure rate that may be
due to poor DVD quality or
due to poor DVD quality or unstable DVD writing in high speed. Under this
unstable DVD writing in high speed. Under this circumstance,
circumstance,
please lower the writing speed under this setting to get higher successful rate. On the
please lower the writing speed under this setting to get higher successful rate. On the
contrary
contrary, lower value setting
, lower value setting will make the writi
will make the writing speed slower and confuse you as a
ng speed slower and confuse you as a
problematic duplicator. Press MODE to change the setting and GO
problematic duplicator. Press MODE to change the setting and GO to exit.
to exit.
6.1
6.1.26
.26 Grip befor
Grip befor e
e accept
accept
When the option of “Autoloader” function is set to “extended” or “extend2”, the setting of
When the option of “Autoloader” function is set to “extended” or “extend2”, the setting of
“Grip before accept” must set
“Grip before accept” must set to “Yes” correspondently which will ask the autoloader do
to “Yes” correspondently which will ask the autoloader do
the index repositioning during power booting stage. If with other setting in “Autoloader”,
the index repositioning during power booting stage. If with other setting in “Autoloader”,
please choose “No” in this
please choose “No” in this function.
function.
6.
6.1.
1.27
27 Load Nonblank Disc (if
Load Nonblank Disc (if HD
HDD installed)
D installed)
This setting is mainly f
This setting is mainly for Autoloader and controls the loading of non-blank disc in
or Autoloader and controls the loading of non-blank disc in any
any
writer. If setting is
writer. If setting is “Y
“Yes”, whenever there is a
es”, whenever there is a non-blank disc detected by the writer, the
non-blank disc detected by the writer, the
duplicator will go to “Load” function automatically and start loading the data from that
duplicator will go to “Load” function automatically and start loading the data from that
non-blank disc into current partition of
non-blank disc into current partition of hard drive. Through this function, you can control
hard drive. Through this function, you can control
the Autoloader to copy multi-master discs fully automated. Press MODE
the Autoloader to copy multi-master discs fully automated. Press MODE to change
to change
setting and GO to exit.
setting and GO to exit.
6.1
6.1.28
.28 CDD
CDDA load sp
A load sp eed
eed (if HDD
(if HDD ins
ins tall
tall ed)
ed)
Normally
Normally, when reading music track,
, when reading music track, the CD/DVD-ROM drive will
the CD/DVD-ROM drive will automatically lower
automatically lower
the reading speed significantly
the reading speed significantly. Unstable reading situation may happen if
. Unstable reading situation may happen if we use the
we use the
maximum speed of CD/DVD-ROM drive to
maximum speed of CD/DVD-ROM drive to read music track. This will affect the
read music track. This will affect the quality
quality
of music CD/DVD duplicated. This setting change the speed of
of music CD/DVD duplicated. This setting change the speed of music track loading to
music track loading to
enhance stability of music track reading. Default
enhance stability of music track reading. Default setting is “AUTO”.
setting is “AUTO”.
Press MODE to change the setting and GO to exit.
Press MODE to change the setting and GO to exit.
6.1
6.1.29
.29 Langu
Langu age
age (for DVD
(for DVD-6xx series only
-6xx series only ))
There are several languages built-in for menu displaying and you can switch it by this
There are several languages built-in for menu displaying and you can switch it by this
function to match your requirement accordingly. The default setting is “English”.
function to match your requirement accordingly. The default setting is “English”.
Page 22 of 33
Page 22 of 33
