DVD-688 Controller
DVD-688 Controller
5
5.
. M
Ma
ain
in F
Fun
unct
ctio
ion
n
Main functions explained below
Main functions explained below (Copy
(Copy, Copy+Comp, Compare, etc.)
, Copy+Comp, Compare, etc.) are based on
are based on
factory’s default setting. Different settings will cause duplicator to
factory’s default setting. Different settings will cause duplicator to react differently
react differently. Please
. Please
press and keep holding down the MODE switch while turning on the power till the “clear
press and keep holding down the MODE switch while turning on the power till the “clear
setup” message is shown on the LCD; the duplicator will return to factory’s default setting
setup” message is shown on the LCD; the duplicator will return to factory’s default setting
as a reset.
as a reset.
Above version BIOS 3.40 an
Above version BIOS 3.40 and with 3-button control panel, func
d with 3-button control panel, functions in main menu can be
tions in main menu can be
switched forwardly by pressing the MODE button once at a time.
switched forwardly by pressing the MODE button once at a time. Either, it can be switched
Either, it can be switched
backwardly by pressing BACK button.
backwardly by pressing BACK button.
5.1 Copy
5.1 Copy
Make sure the present partition in
Make sure the present partition in hard drive is correct
hard drive is correct and contains data (with hard
and contains data (with hard
drive installed) or the master disc is loaded in the CD/DVD-ROM drive (without hard
drive installed) or the master disc is loaded in the CD/DVD-ROM drive (without hard
drive installed) before copying. Place blank CD/DVD discs into
drive installed) before copying. Place blank CD/DVD discs into the writers, when all
the writers, when all
writers detect the CDs/DVDs, duplicator will
writers detect the CDs/DVDs, duplicator will start copying automatically
start copying automatically. When fewer
. When fewer
copies are required, place the required
copies are required, place the required number of blank CD/DVD discs into
number of blank CD/DVD discs into writers. Till
writers. Till
you see a number “X” of “X”start which matches the number of disc placed in the
you see a number “X” of “X”start which matches the number of disc placed in the
writer(s), press the GO switch manually to start the duplication.
writer(s), press the GO switch manually to start the duplication.
When Copy is finished, those discs passed will be ejected automatically and failed ones
When Copy is finished, those discs passed will be ejected automatically and failed ones
will be remained in writers. Press MODE switch to eject failed
will be remained in writers. Press MODE switch to eject failed discs. Put new
discs. Put new
CDs/DVDs in the writers for
CDs/DVDs in the writers for additional copy
additional copy. Duplicator can also copy r
. Duplicator can also copy rewritable discs
ewritable discs
containing data if the writers are
containing data if the writers are capable of writing the rewritable discs. Data
capable of writing the rewritable discs. Data stored in
stored in
rewritable discs will be quickly erased automatically before copying new
rewritable discs will be quickly erased automatically before copying new data, no
data, no
special setting or procedure required to erase
special setting or procedure required to erase the old data.
the old data.
5.2
5.2 Copy +
Copy + Comp
Comp
This function will do copying and
This function will do copying and also comparing the passed discs with the master.
also comparing the passed discs with the master.
Under this function, the discs
Under this function, the discs that passed in copying will be ejected
that passed in copying will be ejected and re-inserted
and re-inserted
again automatically for compare purpose. The passed discs will be ejected
again automatically for compare purpose. The passed discs will be ejected
automatically after comparison. The failed discs will remain in the
automatically after comparison. The failed discs will remain in the writers. Press MODE
writers. Press MODE
switch will eject those failed discs.
switch will eject those failed discs.
Only data CD/DVD will be compared with
Only data CD/DVD will be compared with the master, VCD, Vedio DVD or music
the master, VCD, Vedio DVD or music
CD/DVD will not be
CD/DVD will not be compared.
compared.
5.3 Emulate
5.3 Emulate
This function performs emulation similar to Copy function except that data is not really
This function performs emulation similar to Copy function except that data is not really
written onto the disc. The CD/DVD discs will be remained blank when emulation is
written onto the disc. The CD/DVD discs will be remained blank when emulation is
completed. For rewritable discs that contain data, emulate will
completed. For rewritable discs that contain data, emulate will do quick erase of all
do quick erase of all old
old
data before emulation. Thus, never do Emulate function on
data before emulation. Thus, never do Emulate function on rewritable discs that contain
rewritable discs that contain
important data. (Be aware that DVD+R
important data. (Be aware that DVD+R disc cannot be emulated since the real
disc cannot be emulated since the real copy will
copy will
Page 12 of 33
Page 12 of 33
