Wytron Technolog
Wytron Technolog y Co.,
y Co., Ltd.
Ltd.
6.
6.1.
1.6
6 Aut
Aut oloader (if
oloader (if autoloader installed)
autoloader installed)
This duplicator can be used as an
This duplicator can be used as an independent controller card for external auto-loading
independent controller card for external auto-loading
mechanism. If autoloader is installed, this setting must be set to correspondent type
mechanism. If autoloader is installed, this setting must be set to correspondent type
such as “CDF4800”, “classic”, “class2”, “extended”, “extend2”, etc. Default setting is
such as “CDF4800”, “classic”, “class2”, “extended”, “extend2”, etc. Default setting is
“No”. The external auto-loading mechanism must be qualified and approved by
“No”. The external auto-loading mechanism must be qualified and approved by Wytron.
Wytron.
Any non-approve
Any non-approved equipment may dam
d equipment may damage the controller card and af
age the controller card and affect operations. T
fect operations. To
o
connect the autoloader
connect the autoloader, you will
, you will also need an extra COM
also need an extra COM port module from Wytron to
port module from Wytron to
communicate between controller card and autoloader. If no autoloader is connected
communicate between controller card and autoloader. If no autoloader is connected
actually but set this
actually but set this option by mistake to one of
option by mistake to one of the types for autoloader, during new
the types for autoloader, during new
power booting, the controller card will hang in “check loader…” message which is
power booting, the controller card will hang in “check loader…” message which is
intending to search and communicate with the
intending to search and communicate with the autoloader
autoloader. Please change back the
. Please change back the
setting of this function to “No” option when the hang is finished (might take quite a l
setting of this function to “No” option when the hang is finished (might take quite a l ong
ong
time) or simply “reset” the machine once to bring back the factory’s default setting on
time) or simply “reset” the machine once to bring back the factory’s default setting on
controller card.
controller card.
Press MODE to change the setting and GO to exit.
Press MODE to change the setting and GO to exit.
6.1.7 Eject Disc
6.1.7 Eject Disc
This setting controls the ejection of
This setting controls the ejection of discs by writer. Three options are available:
discs by writer. Three options are available: “Always”
“Always”
means the writers will
means the writers will always eject the discs no matter
always eject the discs no matter whether operation is successful
whether operation is successful
or failed. “No” means all discs will remain in writers
or failed. “No” means all discs will remain in writers when job is done and you will have
when job is done and you will have
to eject discs from
to eject discs from the writers manually. “Pass” setting will only eject the passed discs
the writers manually. “Pass” setting will only eject the passed discs
automatically and leave the failed ones in the writers. Press MODE button will eject
automatically and leave the failed ones in the writers. Press MODE button will eject
those failed discs.
those failed discs.
Press MODE to change the setting and GO to exit.
Press MODE to change the setting and GO to exit.
6.1.8 Buzzer
6.1.8 Buzzer
This setting controls ON and OFF of buzzer. Default setting is “On”. Press MODE switch
This setting controls ON and OFF of buzzer. Default setting is “On”. Press MODE switch
to change and GO to exit.
to change and GO to exit.
6.1.9 CD+G
6.1.9 CD+G
This setting activates the copy capability of CD+G format. It cannot be copied if the
This setting activates the copy capability of CD+G format. It cannot be copied if the
writers don’t support this format. Default setting is
writers don’t support this format. Default setting is “No”.
“No”.
Press MODE switch to change and GO to exit.
Press MODE switch to change and GO to exit.
6.1.10 CopyComp Eject
6.1.10 CopyComp Eject
This setting controls the ejection
This setting controls the ejection of writers’ trays under “copy + compare” function. If
of writers’ trays under “copy + compare” function. If the
the
setting is “Yes”, the trays will eject
setting is “Yes”, the trays will eject the passed discs after copying and it will
the passed discs after copying and it will re-insert the
re-insert the
same discs again for subsequent comp
same discs again for subsequent comparison. If setting is “No”, the
arison. If setting is “No”, the trays will not be
trays will not be
ejected between copy and compare. The default setting is “Auto”
ejected between copy and compare. The default setting is “Auto” which means ejection
which means ejection
of trays will depend on the writers. If
of trays will depend on the writers. If it supports auto-ejection, the tray will be ejected
it supports auto-ejection, the tray will be ejected
after copying. If not, the
after copying. If not, the tray will not
tray will not be ejected even when setting is
be ejected even when setting is “Ye
“Yes”.
s”.
Page 17 of 33
Page 17 of 33
