Wytron Technolog
Wytron Technolog y Co.,
y Co., Ltd.
Ltd.
6.2 Edit
6.2 Edit
Edit function, in
Edit function, in sub-function, is a track-selecting function that can
sub-function, is a track-selecting function that can combine tracks on
combine tracks on
different master discs into one single disc. For example, you can make a collection of
different master discs into one single disc. For example, you can make a collection of
favorite songs from different master music discs and store them into one disc.
favorite songs from different master music discs and store them into one disc.
Switch to “Clear” function to erase the existed data, if
Switch to “Clear” function to erase the existed data, if any, in the hard drive’s current
any, in the hard drive’s current
partition to store the new music tracks. Switch to EDIT by pressing the MODE switch in
partition to store the new music tracks. Switch to EDIT by pressing the MODE switch in
sub-function, load your master disc into CD/DVD-ROM (if there is
sub-function, load your master disc into CD/DVD-ROM (if there is no hard drive installed,
no hard drive installed,
the blank CD/DVD discs must be inserted to writers for “track at once” on-the-fly instant
the blank CD/DVD discs must be inserted to writers for “track at once” on-the-fly instant
copy). Duplicator will analyze the master
copy). Duplicator will analyze the master disc and show total xx
disc and show total xx tracks on LCD display
tracks on LCD display
and finally stop at:
and finally stop at:
Begin track
Begin track
[+]
[+]
0
0
[Quit]
[Quit]
Press MODE switch to change the number of track (song) that you wish to start with and
Press MODE switch to change the number of track (song) that you wish to start with and
then press GO switch to quit. After quitting, the LCD
then press GO switch to quit. After quitting, the LCD display will stop at:
display will stop at:
End track
End track
[+]
[+]
0
0
[Quit]
[Quit]
The number selected must be same or larger than that selected in “Begin track”. Same
The number selected must be same or larger than that selected in “Begin track”. Same
number means you want to select a single track and larger number means you want to
number means you want to select a single track and larger number means you want to
select a sequence of tracks in that particular master disc.
select a sequence of tracks in that particular master disc. After selecting the “End track”,
After selecting the “End track”,
duplicator will bring you back to “Begin track” selection. Repeat the same procedures to
duplicator will bring you back to “Begin track” selection. Repeat the same procedures to
collect other tracks in different sequence that you want to copy. If no more track i
collect other tracks in different sequence that you want to copy. If no more track i s
s
selected, press GO switch directly at “Begin track” and press once again GO at “End
selected, press GO switch directly at “Begin track” and press once again GO at “End
track” to exit. Duplicator will start loading those music tracks selected into the current
track” to exit. Duplicator will start loading those music tracks selected into the current
partition of hard drive. After finishing loading, the master disc will be
partition of hard drive. After finishing loading, the master disc will be ejected
ejected
automatically and LCD will display the
automatically and LCD will display the message of “Pass”. You may change the
message of “Pass”. You may change the master
master
disc and run the Edit function again to gather more music tracks from different master
disc and run the Edit function again to gather more music tracks from different master
discs. When finishing the collection, switch
discs. When finishing the collection, switch the function to Copy and
the function to Copy and place blank
place blank
CD/DVD discs into writers for copying.
CD/DVD discs into writers for copying.
If there is no hard drive installed and when selection of music tracks from the master
If there is no hard drive installed and when selection of music tracks from the master
disc in CD/DVD-ROM drive is
disc in CD/DVD-ROM drive is completed, the duplicator will prompt you
completed, the duplicator will prompt you the message:
the message:
Finalize
Finalize
[+]
[+] No
No
[Quit]
[Quit]
If there are still other tr
If there are still other tracks need to be collected, the setting of Finalize must be “No”.
acks need to be collected, the setting of Finalize must be “No”.
Press GO switch to quit and the duplicator will start t
Press GO switch to quit and the duplicator will start t o copy directly the selected tracks
o copy directly the selected tracks
onto blank discs. After finishing the copy, the master disc will be ejected automatically
onto blank discs. After finishing the copy, the master disc will be ejected automatically
and prompt you “Pass” in the LCD display. You will note that the target
and prompt you “Pass” in the LCD display. You will note that the target discs in writers
discs in writers
will not be ejected at this moment. You can change another master disc in the
will not be ejected at this moment. You can change another master disc in the
CD/DVD-ROM drive. Duplicator will analyze the master disc and bring you to the “Begin
CD/DVD-ROM drive. Duplicator will analyze the master disc and bring you to the “Begin
track” message on LCD again. You can
track” message on LCD again. You can repeat the procedures described above to
repeat the procedures described above to
Page 23 of 33
Page 23 of 33
