DVD-688 Controller
DVD-688 Controller
Password can be changed again by setting Yes to the Change Password function but
Password can be changed again by setting Yes to the Change Password function but
the current password must be input
the current password must be input correctly first. If
correctly first. If user wants to disable the password
user wants to disable the password
function, simply set the
function, simply set the password to 0000 and then the password function will be
password to 0000 and then the password function will be
deactivated (0000 cannot be set as password).
deactivated (0000 cannot be set as password).
Wrong password input during the booting stage will cause the
Wrong password input during the booting stage will cause the hang of duplicator and
hang of duplicator and
freeze all operation. User must
freeze all operation. User must restart the machine to input
restart the machine to input the correct password again.
the correct password again.
6.1.20 Startup Command
6.1.20 Startup Command
This setting specifies the first function appeared when duplicator is turned on so as to
This setting specifies the first function appeared when duplicator is turned on so as to
avoid repeated selection all the time.
avoid repeated selection all the time.
Press MODE switch to change and GO to exit.
Press MODE switch to change and GO to exit.
6.1
6.1.21
.21 CD
CD to CD (
to CD (if HDD
if HDD in
instal
stalled)
led)
This setting controls the source location
This setting controls the source location of master data. Select “Yes” to bypass the
of master data. Select “Yes” to bypass the
existing hard drive and you can copy directly from CD/DVD to CD/DVD or
existing hard drive and you can copy directly from CD/DVD to CD/DVD or select “No” to
select “No” to
copy CD/DVD from data stored in current partition of hard drive. This option setting will
copy CD/DVD from data stored in current partition of hard drive. This option setting will
not be saved and will
not be saved and will be restored to “NO”
be restored to “NO” during rebooting of duplicator. Y
during rebooting of duplicator. You will have
ou will have
to change the setting again after rebooting if
to change the setting again after rebooting if you wish to use on-the-fly direct
you wish to use on-the-fly direct copy while
copy while
there is a hard drive installed. This setting will appear only if there is a
there is a hard drive installed. This setting will appear only if there is a hard drive
hard drive
installed. Press MODE switch to change setting and GO to bring you to next setting.
installed. Press MODE switch to change setting and GO to bring you to next setting.
For DVD-688, the setting for “
For DVD-688, the setting for “CD to CD” will
CD to CD” will be saved and if you cannot use the
be saved and if you cannot use the “LOAD”
“LOAD”
function when the hard drive is actually installed; please change the option of “CD to
function when the hard drive is actually installed; please change the option of “CD to
CD” to “No” manually.
CD” to “No” manually.
6.1
6.1.22
.22 HDD
HDD Partit
Partit io
ion Size
n Size (if HDD
(if HDD in
instal
stalled)
led)
This setting defines the partition size that created on connected hard drive by controller
This setting defines the partition size that created on connected hard drive by controller
card itself. Any hard drive connected on Wytron’s controller card will
card itself. Any hard drive connected on Wytron’s controller card will be partitioned by
be partitioned by
controller card itself and end-user needs not
controller card itself and end-user needs not to pre-arrange any additional process on
to pre-arrange any additional process on
the hard drive. User just
the hard drive. User just needs to connect the hard drive on
needs to connect the hard drive on the Wytron’s controller card
the Wytron’s controller card
and then the controller card will
and then the controller card will handle the partition job automatically
handle the partition job automatically. All the data
. All the data
stored in hard drive before connecting on controller card will be erased and overwritten
stored in hard drive before connecting on controller card will be erased and overwritten
after connection on the controller card and end-user must
after connection on the controller card and end-user must avoid of using such hard
avoid of using such hard
drive with valuable data in it.
drive with valuable data in it.
There are total four option
There are total four option settings under this function which are Auto (default
settings under this function which are Auto (default setting),
setting),
850M, 4.8G and 9.6G
850M, 4.8G and 9.6G. The default setting of
. The default setting of this function is Auto which will
this function is Auto which will handle the
handle the
partition size by controller card itself during drive detection when booting. If controller
partition size by controller card itself during drive detection when booting. If controller
card finds no DVD writers in the connected drives, the 850M of partition size would be
card finds no DVD writers in the connected drives, the 850M of partition size would be
chose. If there are DVD writers detected by controller card and the first of
chose. If there are DVD writers detected by controller card and the first of them
them
supports the DL (Double Layer), the 9.6G of partition size
supports the DL (Double Layer), the 9.6G of partition size would be auto-selected. But if
would be auto-selected. But if
this first detected DVD writer
this first detected DVD writer only supports the single layer DVD, the 4.8G partition size
only supports the single layer DVD, the 4.8G partition size
would be used, instead of 9.6G.
would be used, instead of 9.6G.
Page 20 of 33
Page 20 of 33
