5-38
Basic Configuration
•
HTTP Access (Web Access):
Enables/disables the Web Browser Interface.
When disabled, users will not be allowed to contact the unit via the Web Browser
Interface. (Default = Off.)
•
HTTP Port:
Selects the TCP/IP port number that will be used for SSH connections.
(Default = 80.)
•
HTTPS Access:
Enables/disables HTTPS communication. For instructions on
setting up SSL encryption, please refer to Section 14. (Default = Off.)
•
HTTPS Port:
Selects the TCP/IP port number that will be used for HTTPS
connections. (Default = 443.)
Notes:
• In the Text Interface, HTTP and HTTPS parameters reside in a separate
submenu. To enable and configure HTTP and HTTPS Access via the
Text Interface, access the Network Configuration Menu as described in
Section 5.9, then type
23
, press
[Enter]
and use the resulting submenu
(Figure 14.1) to select parameters as described in Section 14.
• When the Web Access parameter is accessed via the Text Interface, the
resulting submenu will also allow you to select SSL (encryption) parameters
as described in Section 14.
•
Harden Web Security:
When the Harden Web Security feature is On (default,) only
the high and medium cypher suites for SSLv3 and TLSv1 will be enabled. When
the Harden Web Security feature is Off, all SSL protocols will be enabled, allowing
compatibility with older browsers. Note that in the Text Interface, this option is
enabled/disabled via the Web Access submenu. (Default = On.)
•
SYSLOG Address:
The IP Address or domain name (up to 64 characters) for the
Syslog Daemon that will receive log records generated by the RSM-8R. For more
information, please refer to Section 11. (Default = undefined.)
Note:
The Syslog Address submenu in the Text Interface includes a Ping Test
function that is used to ping the user-selected Syslog IP Address to verify that a
valid IP address has been entered. In order for the Ping Test feature to function,
your network and/or firewall must be configured to allow ping commands.