manualshive.com logo in svg

WTI RSM-8R4-1, Руководство пользователя, Страница: 26 / 179

Поделиться
Скачать
WTI RSM-8R4-1 Скачать руководство пользователя страница 26

5-3

Basic Configuration

5.1.3.  Access Via PDA

In addition to the Web Browser Interface and Text Interface, the RSM-8R command 
mode can also be accessed by PDA devices.  Note however, that due to nature of most 
PDAs, only a limited selection of RSM-8R operating and status display functions are 
available to users who communicate with the unit via PDA.

When the RSM-8R is operated via a PDA, only the following functions are available:

•  Product Status Screen (Unit Info)  (Section 8.1)
•  Port and Plug Status Screen  (Section 8.3)
•  Plug Group Status Screen  (Section 8.4)
•  Plug Control Screen  (Section 9.1.1)
•  Plug Group Control Screen  (Section 9.1.2)

For more information on these functions, please refer to the appropriate section listed 
next to each function in the list above.

These screens will allow PDA users to review Plug Status and Plug Group Status, 
invoke power switching and reboot commands and display the Site I.D. and firmware 
version.  Note however, that PDA users are not allowed to change or review RSM-8R 
configuration parameters.

To configure the RSM-8R for access via PDA, first consult your IT department for 
appropriate settings.  Access the RSM-8R command mode via the Text Interface or Web 
Browser interface as described in this section, then configure the RSM-8R's Network 
Port accordingly, as described in Section 5.9.

In most cases, this configuration will be adequate to allow communication with most 
PDAs.  Note however, that if you wish to use a BlackBerry

®

 to contact the RSM-8R, 

you must first make certain to configure the BlackBerry to support HTML tables, as 
described below:

1.  Power on the BlackBerry, and then click on the BlackBerry Internet Browser Icon.

2.  Press the Menu button, and then choose "Options."

3.  From the Options menu, choose "Browser Configuration," then verify to make 

certain that "Support HTML Tables" is checked (enabled.)

4.  Press the Menu button, and select "Save Options."

When you have finished communicating with the RSM-8R via PDA, it is important to 
always close the session using the PDA's menu functions, rather than by simply closing 
the browser window, in order to ensure that the RSM-8R has completely exited from 
command mode, and is not waiting for the inactivity timeout period to elapse.  For 
example, to close a session on a BlackBerry, press the Menu button and then  
choose "Close."

Содержание RSM-8R4-1




















































































































































































Отзывы:

Нет отзывов