WTI RSM-8R4-1 Скачать руководство пользователя страница 166 | Manualshive

Страница: 166 / 179

WTI RSM-8R4-1 Скачать руководство пользователя страница 166

17-13

Command Reference Guide

/RB

Reboot Options

Displays a menu that is used to configure Scheduled Reboots and Ping-No-Answer
Reboots. Scheduled Reboots allow the devices connected to RSM-8R's switched
outlets to be rebooted on a regular basis, according to a user defined schedule.
Ping-No-Answer Reboots allow the RSM-8R to automatically reboot specific outlets
when a user-specified IP address does not respond to a Ping command. For more
information on Reboot options, please refer to Section 6.

Note:

If desired, the Ping-No-Answer Reboot function can also be configured

to send email notification whenever a Ping-No-Answer Reboot is generated. For
more information, please refer to Section 7.2.

Availability:

Administrator

Format:

/RB

[Enter]

/AC

Alarm Configuration Parameters

Displays a menu that is used to configure and enable the RSM-8R's monitoring and
alarm functions. For more information on Alarm Configuration, please refer to Section 7.

Availability:

Administrator

Format:

/AC

[Enter]

/I

Reboot System (Default)

Reinitializes the RSM-8R unit and offers the option to keep user-defined parameters or
reset to default parameters. As described in Sections 5.10.1 and 15.3, the /I command
can also be used to restore the unit to previously saved parameters. When the /I
command is invoked, the unit will offer four reboot options:

•  Reboot Only (Do NOT default parameters)
•  Reboot & Default (Keep IP Parameters & SSH Keys; Default all other parameters)
•  Reboot & Default (Default ALL parameters)
•  Reboot & Restore Last Known Working Configuration

Availability:

Administrator

Format:

/I

[Enter]

«
...
164
165
166
167
168
...
»

Содержание RSM-8R4-1




















































































































































































Отзывы:

Нет отзывов