WSTECH BAT1200-ES-2-270-1, Оригинальная инструкция по эксплуатации

Страница: 13 / 60

Original Operating Instructions
BATI0XXX-ES-1-ZZZ-1
User Information
O_BATI_0XXX-ES-1-ZZZ-1_V1.4_GB Seite 13 von 60
1.5 Intended Use
This product is intended for use exclusively with batteries. It is used for converting the
DC current supplied by battery into an AC current and vice versa.
The BATI0XXX can operate in different operating modes. These modes are described
in the
Interface Description .
The product fulfils the IP20 degree of protection. The product is protected against dust
intrusion with a diameter of 12.5 mm and higher. The product is constructed for indoor
use.
The product is not suitable for operation in areas with the risk of explosion.
Keep the product away from flammable or combustible materials.
Only operate the product with the maximum permissible connection values stated in
the electrical data.
The operating conditions given in the technical data must be fulfilled at all times.
The type plate, product safety signs and labels must remain permanently attached to
the product.
Never operate the product with open doors.
Never operate the product with any technical defects.
Use only the spare parts that are listed in this document. The use of other spare parts
shall be construed as an alteration.
Work with or on the product is allowed only, if all persons have all skills described for
target audience.
For all work with or on the product appropriate tools must be used.
Unauthorized persons are not allowed to operate the product and must keep a safe
distance from the product.
Without approval of the grid operator do not switch off or adjust settings which have
influence on the grid management service.
Whenever working on the product, the ESD protection measures must be observed.
It is prohibited to open the product, when it is raining or humidity is greater than 95%.
Improper use of the product may pose a substantial danger to all individuals involved.
All changes or modifications to the equipment, its structure or its software are
prohibited and will result in loss of warranty.
Intended use includes reading the operating instructions and complying with all
instructions contained herein, in particularly the safety instructions. These operating
instructions must be kept near or in the product for the lifetime of the product. Should
these operating instructions get lost or are destroyed, the customer shall immediately
contact the manufacturer to order, at the customer's sole expense, new operating
instructions.