WSTECH BAT1200-ES-2-270-1, Оригинальная инструкция по эксплуатации

Страница: 25 / 60

Original Operating Instructions
BATI0XXX-ES-1-ZZZ-1
Installation
O_BATI_0XXX-ES-1-ZZZ-1_V1.4_GB Seite 25 von 60
3.3 Installation Site
3.3.1 Installation Site Requirements
3.3.1.1 Environment Variables
Temperature, air humidity and air quality as well as all further details about the
installation site must comply with the conditions mentioned in section 11.2.2.
3.3.1.2 Foundation
The foundation must be able to support the weight of the product and the transport
vehicle (Section 11.2.2).
It is important that the foundation on which the product is parked, is level, stable, slip-
resistant, and fire resistant, to avoid a tilted position or a tipping over, also with opened
doors.
3.3.1.3 Distances
Ensure that there is sufficient room to perform operation and maintenance work.
Following distances must be maintained:
•
Front: Minimum 600 mm with opened door
•
Oben: Minimum 200 mm
The sides and the backside are without specified minimum distance.
Make sure that the minimum required distances for escape routes are observed. Follow
the rules and instructions that exist.
3.3.1.4 Cooling Air Inlet and Outlet
NOTICE
Damage of the product due to overheating!
Insufficient cooling air for the product can lead to damage or
overheating.
•
Ensure that sufficient cooling is available at the installation site.
The product must be set up on a foundation to ensure that sufficient air can be sucked
in. The air is sucked in from below, flows to the components to be cooled, and is blown
out through the fan cover to the back side by means of radial fans. The moved air
volume can be seen in section 11.2.2.