Worldwide Construction And Forestry Division 380GLC, Руководство оператора

Страница: 95 / 288

Operation—Monitor Operation
OUT4001,000072B -19-28FEB12-1/1
Main Menu—Setting Menu—Rear View
Camera Monitor
CAUTION: The rear view camera image is
designed to supplement other safety practices
and is not intended to be the sole method
of collision avoidance. Always be alert and
aware of the surroundings when operating
this machine to avoid possible injury or
death to operator or others.
NOTE: When the rear view camera mode is enabled,
the color of the preceding square is green and
rear view image (1) is continuously displayed
on the default screen.
NOTE: For a clear image, clean lens and monitor
before operating the machine. The monitor
and camera lens surface is a resin product.
Lightly wipe the surface with a wet, clean cloth.
Never use an organic solvent.
The Rear View Camera Monitor menu provides the
capability to turn the camera ON or OFF so the view
behind the machine is shown on the monitor.
At Setting Menu, rotate monitor dial to highlight Rear View
Camera Monitor. Press monitor dial to display Rear View
Camera Monitor menu.
□
ON (Enable)
Press monitor dial to turn ON (enable) the rear view
camera mode on the monitor. Press monitor dial again
to disable rear view camera mode.
Never attempt to change the mounting position of the
rear view camera (2). If rear view camera monitor is not
operating properly, see your authorized dealer.
Press Back button to return to previous screen.
Press Home button to return to default screen.
TX1086330A
—UN—28DEC10
Rear View Image
TX1086331A
—UN—28DEC10
Camera
1— Rear View Image
2— Rear View Camera
2-2-20 092221
PN=95