Worldwide Construction And Forestry Division 380GLC, Руководство оператора

Страница: 133 / 288

Maintenance—Machine
OUT4001,0000B94 -19-06MAR12-1/1
DX,FILT1 -19-11APR11-1/1
Engine Oil and Filter Service Intervals
NOTE: The following engine oil and filter service interval
information is specified for engines that meet Interim
Tier 4 and Stage III B emission levels.
Recommended oil and filter service intervals are based
on a combination of oil pan capacity, type of engine oil
and filter used, and sulfur content of the diesel fuel.
Actual service intervals also depend on operation and
maintenance practices.
Use oil analysis to evaluate the condition of the oil and to
aid in selection of the proper oil and filter service interval.
Contact your John Deere dealer for more information on
engine oil analysis.
Change the oil and oil filter at least once every 12 months
even if the hours of operation are fewer than the otherwise
recommended service interval.
Diesel fuel sulfur content affects engine oil and filter
service intervals. Higher fuel sulfur levels reduce oil and
filter service intervals.
Use of diesel fuel with sulfur content less than 15 mg/kg
(15 ppm) is REQUIRED.
IMPORTANT: To avoid engine damage:
•
Reduce oil and filter service intervals by 50%
when using biodiesel blends greater than B20.
Oil analysis may allow longer service intervals.
•
Use only approved oil types.
Approved Oil Types:
•
John Deere Plus-50™ II.
•
“Other Oils” include API CJ-4, ACEA E9, and ACEA E6.
NOTE: The 500 hour extended oil and filter change
interval is only allowed if all of the following
conditions are met:
•
Use of diesel fuel with sulfur content less
than 15 mg/kg (15 ppm).
•
Use of John Deere Plus-50™ II oil.
•
Use of an approved John Deere oil filter.
Engine Oil and Filter Service Intervals
John Deere Plus-50™ II 500 hours
Other Oils 250 hours
Plus-50 is a trademark of Deere & Company
Oil Filters
Filtration of oils is critically important for proper operation
and lubrication. John Deere brand oil filters have been
designed and produced specifically for John Deere
applications.
John Deere filters adhere to engineering specifications for
quality of the filter media, filter efficiency rating, strength
of the bond between the filter media and the element end
cap, fatigue life of the canister (if applicable), and pressure
capability of the filter seal. Non-John Deere branded oil
filters might not meet these key John Deere specifications.
Always change oil filters regularly as specified in this
manual.
3-1-9 092221
PN=133