Worldwide Construction And Forestry Division 380GLC, Руководство оператора

Страница: 117 / 288

Operation—Operating the Machine
OUT4001,0000867 -19-26JUL21-2/2
CN93077,0000008 -19-24AUG12-1/1
Control Lever Pattern Operation
CAUTION: Avoid personal injury from unexpected
machine movement. Never place any part of
body beyond window frame to avoid serious
crushing injury from boom. Boom could lower
if the control lever is accidentally bumped
or otherwise engaged. Immediately replace
a missing or broken window.
Prevent injury from unexpected control lever
function. Be aware of the control lever pattern
used on the machine before operating.
The machine comes equipped from the factory with the
excavator control lever pattern. A label, with both the
excavator and backhoe control lever patterns, is installed
on the right cab window.
Check the patterns on the label, and then carefully operate
the control levers to verify the pattern on machine.
To change the pattern from excavator to backhoe, see
Mechanical Control Lever Pattern Selector - If Equipped,
in this section.
NOTE: A control pattern selector is an available field kit,
that when installed, allows operator to change the
control lever pattern using a mechanical valve.
Control levers return to neutral when released. Functions
will stop and remain positioned. The parking brake for
swing and travel will engage.
1— Arm Out
2— Arm In
3— Swing Left
4— Swing Right 5— Boom Down
6— Boom Up
7— Bucket Curl
8— Bucket Dump
T137500
—UN—25JAN01
Excavator Control Lever Pattern
T137498
—UN—25JAN01
Backhoe Control Lever Pattern
T137499
—UN—25JAN01
Boom, Arm, Bucket Movement
2-3-16 092221
PN=117