Worldwide Construction And Forestry Division 380GLC, Руководство оператора

Страница: 145 / 288

Maintenance—Periodic Maintenance
ER79617,0000D4E -19-28APR14-1/1
VD76477,00001DB -19-24NOV20-1/1
TX,ANALYSIS -19-20JAN11-1/1
Fuel Tank
CAUTION: Fuel is flammable and may ignite if
spilled on hot engine. To prevent injury, handle
fuel carefully. If engine is hot or running, DO NOT
fill the fuel tank. DO NOT smoke while filling
fuel tank or working on fuel system.
Specification
Fuel Tank—Capacity.................................................................... 628.0 L
166.0 gal.
IMPORTANT: Avoid engine damage. If machine has
run out of fuel, engine will not start. Contact
your authorized dealer for instructions.
To avoid condensation, fill the fuel tank at the end of each
work day. Shut off engine before filling.
Hydraulic Breaker Attachment
IMPORTANT: Avoid mixing different brands or types
of oils. Oil manufacturers engineer the oils to
meet certain specifications and performance
requirements. Mixing different oil types can
degrade lubricant and machine performance.
This excavator is factory filled with SUPER
EX 46HN extended life zinc-free hydraulic oil.
Avoid servicing the excavator with products
that do not meet this specification. If oils
have been mixed or if alternate service oils
are desired, an authorized dealer must flush
the complete hydraulic system.
Hydraulic breaker operation subjects the hydraulic system
of the machine to possible contamination and accelerated
deterioration. The hydraulic return filter and hydraulic
oil must be replaced frequently to prevent damage
to hydraulic pumps and other hydraulic components.
Change the hydraulic return filter and hydraulic oil at the
intervals recommended in the table based on the amount
of machine operating time the attachment is used.
NOTE: John Deere recommends the addition of
the hydraulic filter restriction indicator kit
with the attachment.
Percentage of Operating Time
Hydraulic Breaker Used
Hydraulic Return Filter
Change Interval (hours)
Hydraulic Oil Change
Interval (hours)
100 100 600
60 150 800
40 200 1000
20 300 1300
Fluid Analysis Program Test Kits and 3-Way
Coolant Test Kit
Fluid Analysis Program Test Kits and the 3-Way Coolant
Test Kit are John Deere fluid sampling products to help you
monitor machine maintenance and system condition. The
objective of a fluid sampling program is to ensure machine
availability when you need it and to reduce repair costs by
identifying potential problems before they become critical.
Engine, hydraulic, power train, and coolant samples should
be taken from each system on a periodic basis, before
a filter or fluid change interval. Certain systems require
more frequent sampling. Consult your authorized John
Deere dealer on a maintenance program for your specific
application. Your authorized John Deere dealer has the
sampling products and expertise to assist you in lowering
your overall operating costs through fluid sampling.
TX1003513A
—UN—20FEB06
3-2-4 092221
PN=145