Worldwide Construction And Forestry Division 380GLC, Руководство оператора

Страница: 230 / 288

Miscellaneous—Operational Checkout
Continued on next page CN93077,000003A -19-16MAY13-32/53
Swing Dynamic Braking
Check
45˚
90˚
TX1095482 —UN—28JUN13
Swing Dynamic Braking
ACC
O
N
S
T
A
R
T
5
9
3
8
5 4
0
2
7
1
6
OFF
2
MODE
1
A/I
ON
A/I
OFF
OFF
OFF
INT
ON
PUSH
H L
PUSH
TUNE/AM-FM
PUSH
MODE
PUSH
MENU/SET
min -1
L H
PUSH
VOL/PWR
PUSH
/VOL
/PWR
1
2
3
4
TX1086753 —UN—11JAN11
Switch Panel
1— Engine Speed Dial
2— Auto-Idle Switch
3— Travel Speed Switch
4— Power Mode Switch
CAUTION: Avoid possible injury. Make sure area is clear and large enough
to swing extended arm and bucket. Machine must be on level ground.
Position upperstructure with boom to the front.
Move arm to the extended position, bucket to the retracted position, and bucket-to-arm
pivot pin at same level as boom-to-frame pivot pin.
Turn engine speed dial (1) to H (fast idle) position.
Press power mode button (4) until PWR (power) mode is displayed on monitor.
Fully actuate swing function. Swing clockwise 90 degrees and then release lever.
LOOK: Does upperstructure stop within 45 degrees (1/8 turn) or less after releasing
lever?
Position upperstructure with boom to the front.
Fully actuate swing function. Swing counterclockwise 90 degrees and then release
lever. YES: Go to next check.
LOOK: Does upperstructure stop within 45 degrees (1/8 turn) or less after releasing
lever? NO: See your authorized
dealer.
4-2-25 092221
PN=230