Woodward 2301E-ST, Инструкция по установке и эксплуатации

Страница: 121 / 126

Manual 26694 2301E-ST
Woodward 119
1:0010 Analog Input #2 Failed
1:0011 Load Sensor Failed
1:0012 Load Share Line Failed
1:0013 Speed PID In-Control
1:0014 Remote Speed Setpoint Enabled
1:0015 Speed Reference Lower Limit
1:0016 Speed Reference Raise Limit
1:0017 Load Sharing Enabled
1:0018 Overspeed Test Enabled
1:0019 Level SW#1 ON
1:0020 Level SW#2 ON
1:0021 Level SW#3 ON
1:0022 Level SW#4 ON
1:0023 Discrete Input A State
1:0024 Discrete Input B State
1:0025 Discrete Input C State
1:0026 Discrete Input D State
1:0027 Discrete Input E State
1:0028 Discrete Input F State
1:0029 Discrete Input G State
1:0030 Discrete Input H State
1:0031 Relay Output #1 State
1:0032 Relay Output #2 State
1:0033 Relay Output #3 State
1:0034 Relay Output #4 State
1:0035 In Critical Band
1:0036 Stuck In Critical Band Trip
1:0037 SPEED PID SELECT ENABLED
1:0038 DYNAMIC SETTING #2
1:0039 MPU1 FAIL
1:0040 MPU2 FAIL
1:0041 MAX DIFF MPU
Analog Reads
Address Description Multiplier
3:0001 Trip First Out Indication 1
3:0002 Alarm First Out Indication 1
3:0003 Turbine Speed (RPM) 1
3:0004 Speed Reference (RPM) 1
3:0005 Turbine Load (KW) *1.0 (0.0, 1000.0)
3:0006 Actuator Output (%) *10.0 (0.0, 1000.0)
3:0007 Speed PID Output (%) *10.0 (0.0, 1000.0)
3:0008 Analog Input #1 *10.0 (0.0, 1000.0)
3:0009 Analog Input #2 *10.0 (0.0, 1000.0)
3:0010 Valve Limiter Position (%) *10.0 (0.0, 1000.0)
3:0011 MPU 1 (RPM) 1
3:0012 MPU 2 (RPM) 1
Analog Writes
Address Description Multiplier
4:0001 Modbus Remote Speed Setpoint 1.0
Released