13
G
Connecting to the mains (230 Volts, A.C., 50 Hz)
z
The mower operates from any normal household mains supp-
ly, provided with a 16 Amps. fuse.
3
Note: Residual current protection device
These protection devices safeguard while touching
damaged wires, from insulation flaws and in certain cases,
also while damaging live wires.
z
We recommend that the equipment only be plugged into
a power socket, which is protected by a residual current
protection device (RCD) with a residual current of not
more than 30 mA.
z
Retrofit kits are available for old installations. Consult an
electrician.
Starting and Stoping
z
Switch on motor with mowerplaced on level and firm ground.
z
not in high grass - alternatively tilt slightly
.
Switch-on motor
1. Depress button and hold (1).
2. Lift up bar (2).
3. Release button (1).
Switch-off motor
z
Release bar (2).
Emptying of Grassbox
When the collection bag is full, the flap lowers by itself.
1
Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z
Switch off motor and pull out power plug.
z
Empty collection bag.
z
Remove potential blockages in the cutting space before
starting.
3
Instructions for level indicator:
z
For an efficient functioning of the level indicator,
regularly clean the holes under the level indicator in the
collection bag with a hand brush.
Tips for mowing
z
To prevent strips of grass from being left unmowed, the cutting
paths must always overlap a few centimeters
.
z
Always let cable trail on the cut side of the lawn.
Maintenance
General
1
Attention! Rotary cutter blade
Before all maintenance and cleaning work:
z
pull out the power plug.
z
Do not touch running blades.
Cleaning
z
Clean mower thoroughly after each mowing with cloth or
brush.
z
Do not spray with water.
Winter Storage
z
Clean mower thoroughly before storing away.
z
Have your mower thoroughly checked once a year by an ap-
proved Service Centre.
z
Do not store it in a wet or humid place.
Changing blades
z
For all works on blades, coupling and cutter bars, first of all,
pull out the power plug and wear protective gloves.
1
Attention!
An unbalance can develop after regrinding of the blade.
z
Always regrind the blades in a specialist workshop,
because an unbalance check should be undertaken
according to the safety regulations.
z
Always change blades in a specialist workshop. A torque
spanner of 10 mm is mandatorily required.
Fastening torque of the screws: 6-7 N-m
.
Spare parts
O
P
P
Q
R
S
S
Item number
Order description
Product information
4907 031
Grass catcher
4907 096
Vi 37 FM
Replacement blade 37 cm
