MOTUS®C14 Operating Instructions
Page
52
of
73
94 762 000 B
Revision 03.2022
Control of MOTUS
®
C14
•
The device can be controlled via the control inputs (
Pin 2, 4 and 10
) as well as via the
IO-Link interface (see 21).
•
The device is edge sensitive at the control inputs. This means that a change of level,
e.g. from low to high at one of the control inputs, causes the MOTUS
®
C14 to react.
Likewise, with IO-Link, a change of the control bit from 0 to 1 is detected as a change
and the control request is performed accordingly.
The MOTUS
®
C14 always reacts to the last detected edge change and thus has a time
sensitivity with regard to the inputs. It is irrelevant whether the control request is
detected via a control input or via IO-Link.
EPLAN symbol
Figure 12
EPLAN symbol MOTUS
®
C14
– 3~ Configuration
Figure 13
EPLAN symbol MOTUS
®
C14
– 1~ Configuration
•
The package with the associated EPLAN symbols can be downloaded from the
download section of the MOTUS
®
C14 product website (
https://pim.woehner.de/
).
!