MOTUS®C14 Operating Instructions
Page
51
of
73
94 762 000 B
Revision 03.2022
English.
7.5 Connecting the cables
7.5.1 Screw connection
Figure 10
Screw connection
•
Strip 8 mm of insulation from the individual wires.
•
Plug the conductor into the corresponding terminal block.
•
Tighten the screw in the opening above the connection terminal with a screwdriver.
7.5.2 Push-in connection
Figure 11
Push-in connection
•
Rigid or flexible conductors with ferrrules, can be inserted directly into the terminal. (
A
).
•
Flexible conductors without ferrules can be inserted safely by opening the terminal
spring with the pressure release. (
B
).
•
To remove the conductor, the terminal spring must be opened using the pressure
release (
B
).
•
If necessary, use a fixture to fix the plug during connection.
T1
T2
T3