Page 46
Configuring Dolby Presets
If the Dolby Option module is present in the iAM-VIDEO, a Dolby tab will also be
displayed, as shown in Figure 4-4. Choices can be made as to the source of the
Dolby bitstream, as well as which decoded Dolby channels should be monitored.
Dolby channels are mapped to the meters using exactly the same methods used in
the previous section to monitor other channels. Any meter channels which are not
being used for decoded Dolby can be used to monitor any other channels available
on the other tabs.
Figure 4–4: Configuring Dolby Presets
To set up a Preset containing decoded Dolby channels, first select the source of the
Dolby bitstream from the
Dolby Input Source
pull down list. Then select the pair
containing the Dolby bitstream from the
Select Channel Pair
pull down list. Then,
using steps 4 through 11 listed above, complete your configuration of the Preset.