Page 33
left or right to adjust in 1 dB increments. Alternatively, after touching the
control, the
Adjust
knob can be used to more critically adjust the setting.
The monitored audio changes dynamically as the setting is adjusted, which
allows audible and visual synchronization with video monitored on another
product.
Touch
Back
to exit this screen.
Factory Reset
Touching the
Factory Reset
button in the
System Options Menu
displays the
Factory Reset
screen as shown in Figure 2-27. Because of the large change this
function is about to make to the product, it asks for you for verification that you
really want to proceed.
The
Factory Reset
function should be used with caution. It deletes all of the
settings you have programmed into the system.
It returns the system to the way it
was when received new from the factory. After using this function, you will need to
use the Wohler Web GUI to reprogram everything from the start or else import a
Database or the Presets that you previously saved using the Web GUI. Refer to the
Database Management
section of Chapter 4.
Figure 2-27: Factory Reset
Note:
Factory Reset
will also reset your IP address to the default one (Static IP:
172.27.2.2/Gateway: 172.27.2.1/Netmask: 255.255.255.0) and clear the database
of Presets.
If you have any doubt as to whether you should press
Yes
, press
Back
or
No
instead, and contact Wohler Technical Service for advice. Pressing
Back
or
No
will
return you to the
System Options
menu.