Page 24
Source Select
Touch the
Source Select
button to display the
Source Select
screen as shown in
Figure 2-16.
Figure 2-16: Source Select Screen
Using this screen, the installer can quickly determine that the sources are correctly
connected and are ready for use. It allows you to directly monitor each selected
source.
1.
The most recently selected source is shown in light blue.
2.
Sources that the iAM-VIDEO is equipped to monitor are shown in blue.
3.
Sources that the iAM-VIDEO is capable of monitoring, but are not licensed for
monitoring are shown in gray. If you would like to license additional signals,
contact Wohler to purchase the source module and/or license.
To select a source, simply touch the associated button. After a quick 2-second
delay, the metering screen will display the channels contained in that source. The
channels will be muted. Touch the channels you would like to hear on the metering
screen. To exit this menu and return to the
Main Menu
, touch the
Menu
button.
Selecting
MPEG over IP
proceeds to the
VoIP Settings
screen described in the
next section.
If further detail is required to identify your source selection, another screen will
appear for you to use to choose it. An example of this screen is shown in Figure 2-
17.