Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc
Page 4 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice.
Month of issue xx/2007
Art. No. 950 281
1 Important General Information
Please read all attached instructions and information carefully before installing
your stove and putting it into operation. In this way you will avoid operating
errors and malfunction. The installer and the user must inform themselves
sufficiently through the instruction manuals before putting the stove into operation.
Please observe the relevant local technical codes and regulations (for ex. state
building regulations, fireplace regulations, heating and ventilation technical
code, electrical/VDE guidelines etc).
In Germany the appliance may only be put into operation when the district
master chimneysweep has issued an operating licence. Inform him in good time if
you are planning to install or change a fireplace.
The pellet stove’s intended use is described below. Any other use will be deemed
improper. wodtke will assume no liability for any damage resulting from such improper use.
Operating the pellet according to its intended use also means complying with the operating and
assembly instructions. Any inadmissible manipulation or change to the appliance voids all
warranty and guarantee claims.
All work on this stove, including installation, assembly, initial operation, servicing and
repairs, should only be carried out by a duly qualified company (heating or air heating
installers). Improper work performed on this stove voids all warranty and guarantee claims.
Electrical devices may only be assembled and connected to the mains by a duly qualified
electrician. Electronic components such as circuit boards, air flow sensors and the operating
panel are sensitive to electrostatic charge.
As part of the final acceptance procedure the installing company must instruct the user in a
detailed and competent manner on the stove’s operation, cleaning and servicing. The company
must in particular inform the user on the use of suitable fuel, the need for regular cleaning by
the user, the need for servicing and the safety instructions. Any disregard of the attached
instructions, in particular of the need for regular cleaning and servicing, voids all warranty and
guarantee claims.
Before putting the stove into operation make absolutely sure that all accessories have been
taken out of the firebox and ashpit and the fuel hopper is free of residues (for ex. rubbish,
screws…).
The appliance must regularly be cleaned by the user.
For the servicing of the appliance we recommend that the user make a service contract with
his dealer. If he is sufficiently skilled himself and has been instructed in due detail by the
installing company the user may also undertake the regular servicing himself.
Pull the plug before performing any work on the stove! The mains plug and its
socket must be easily accessible at all times. It is forbidden to operate the appliance
if the power cable is damaged. A damaged power cable must immediately be
replaced by a duly qualified craftsman to prevent hazards.
Do not pull the mains plug while the stove is in operation!
First switch off the stove and wait until the fan after-run time
is over (G OFF).
By adhering to the proper use, operation, care and servicing of your wodtke products
you will enhance their value stability and service life, help to conserve valuable
resources and go easy on the environment as well as your purse.
