Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc
Page 51 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice.
Month of issue xx/2007
Art. No. 950 281
6. Release the four screws of front inspection
lid and remove inspection lid.
(Make sure sealing is correctly seated when
reassembling).
Mind hot ash and hidden glowing
embers!
7.
Vacuum burner pot. Lift burner pot out and
clean. Clean combustion air holes with a
suitable
implement
(screwdriver)
if
necessary.
8. Vacuum
pot
holder
and
base
plate
thoroughly.
Important notes: When inserting the burner
pot again make sure it rests fully on the pot
holder. Remove any combustion residues on
the pot or pot holder. Check that the burner
pot is firmly seated in the pot holder and
doesn’t side-wobble by more than 1 to 2 mm
– if it does, you will need to replace the
burner pot (wearing part). The “burner nose”
must point forward.
