Bedienungsanleitung Steuerung S4_2006_09_25-neu.doc
Page 11 / 83
© wodtke GmbH Tübingen. All rights reserved. Subject to change without notice.
Month of issue xx/2007
Art. No. 950 281
The user must regularly clean the burner pot of ash and slag. The viewing window must also be
cleaned to remove the ash deposit that develops as an inevitable side-effect of any solid fuel
combustion. (see Chapter 0). The flueways require regular servicing; this should be done by a
duly qualified company (see Chapter 9).
wodtke appliances are designed, tested and approved for installation in private homes. A
sufficient flow of oxygen must be ensured to keep up the combustion process. The combined
operation of a wodtke appliance with air conditioning devices such as an exhauster hood,
ventilation system or a pneumatic system for wood pellets is therefore only permissible if certain
requirements are met. In this regard please observe any additional information provided by us
or ask your district master chimneysweep or the installing company.
Waterplus appliances not only deliver heat to the domestic water system but inevitably also to
the room of installation. It is the responsibility of the planner or architect of the house or of the
installing company to ensure during the planning phase that the thermal output of the appliance
is compatible with the features of the house, in terms of both the domestic water system and the
control equipment. As a rule of thumb, the room of installation should account for at least 30%
(50% for Topline boilers) of the total heated floor area to prevent overheating.
hopper lid
telescopic fuel hopper
plate water heat
exchanger
feed screw
pellet chute
burner pot
electrical ignition
air flow sensor
combustion air
heat flow and return
flow
terminal flueway
flue gas fan
Behälterdeckel
heat reflector plate
outlet grille
hot air
flue gas deflection
tubular water
heat exchanger
cast metal door
ceramic glass panel
flue gas
cold air
Sectional drawing
Pellet wall stove insert “PE” (Waterplus
appliance)
