WITTUR sematic SDS Rel. 3 Скачать руководство пользователя страница 43

Страница: 43 / 45

www

.wittur

.com

TTUR • All rights r

eser

ved

PM.2.004921.EN - 808-001-000 SDS

rel 3 · Edition 22 July 2020

Drive - Instruction Manual

11 CONTROLLER SOFTWARE UPGRADE

•

Connect the handset to the RJ45 connector

•

If necessary, using keys

and

choose the required language and confirm with the “OK” key

•

Using keys

and

, run through the MAINTENANCE and choose “SOFTWARE UPGRADES”

•

Press “OK” to confirm the choice

•

Display shows the last available update and the software version in use at the moment.

•

Press “OK” to confirm the software update

•

Controller operates a reset and the display shows “Upload” with the progression value of data loading

•

At the end of the upload the controller operates a reset

In case of interruption of connection between handset and controller during the data transfer, turn “off” the controller, turn it “on” again

and reconnect the handset.The upload starts again from the beginning.

12 DOOR OPERATOR MAINTENANCE

At least once a year complete the following checks:

•

Clean the doors (tracks, bottom tracks, belts etc.) from dust or debris as this maintains the door good mechanical operation

•

Check the electric connections and their fitting to the connectors

•

Check that the door operator toothed belt is tight enough and in good working condition

•

Check and clean the cable connections of the motor and of the motor Encoder

13 SPARE PARTS

It is possible to order all the Sematic Drive System

spare parts using the spare parts catalogue, by specifying the required quantity and

the code of the ordered piece.

The spare parts manual is extremely important to avoid misunderstandings and to ensure a rapid supply of the correct spare parts. The

spare parts catalogue, with photographs and details will make the Sematic doors spare parts purchase easy and quick.

OUR COMPONENTS ARE INTENDED FOR ELEVATOR USE ONLY

Содержание sematic SDS Rel. 3














































Результаты поиска

Содержание sematic SDS Rel. 3

Отзывы:

Бренды по названию

Популярные бренды

WITTUR sematic SDS Rel. 3, Инструкция по эксплуатации

Результаты поиска

Содержание sematic SDS Rel. 3

Отзывы:

Бренды по названию

Популярные бренды