Nominal speed
Serial number
UCM contact
distance / speed
Min. brake
force
Rope diameter
Function
UCM type
Safety contact speed /
acceleration
Encoder output
1 = on / 0 = off
mechanical tripping
speed / acceleration
Construction
time tripping
speed
Parameter set
Änderungen vorbehalten!
Subject to change without notice!
Blatt/
sheet
PM.7.002883.EN.12
Datum/
date
23.01.2013
Stand/
version
C-13.10.2014
Geprüft/
approved
WAT/MZE
Overspeed governor EOS
Operating instructions
2.1
General
The governor’s identification indicators are located
at the front stand and at the electronic box at the
back side of the governor stand.
•
Type term of governor
•
Serial number
•
Elevator number
•
Parameter set (see chapter 3.2)
•
Nominal speed (NS)
•
Safety circuit contact speed (CS)
•
Mechanical tripping speed (TS)
•
Construction time tripping speed (CTU)
•
Encoder (240 pulses/rev.) on/off
•
Type regarding UCM function
•
UCM contact distance (CD)
•
UCM contact speed (CL)
These consist of a name plate and an identification
sticker which gives following data:
•
Safety circuit contact acceleration (CA)
•
Mechanical tripping acceleration (TA)
•
Rope diameter
•
Direction of tripping
•
Rope force created during tripping
•
Pulley diameter
•
Configuration number of type label
The governor is adjusted, calibrated and
sealed at the factory. Readjustment is NOT
possible.
2
Name plate, designation, identification
Order number -
Elevator number
(refer to delivery or
order sheet)
Tripping direction
Pulley
diameter
