10
Step 5
Step 5
5.1
Connect the bottom section of the power & communication cord (19) to the right
bar with the top section of the power & communication cord (20) plugged into the
armrest’s connector piece (11).
5.2
Attach the connector to the armrest (11) on the right and left bars (14+13) and use
a wrench (28) to fasten 2 x screws with interior hexagon M8*20 (1), 2 x locking
washers Ø8 (9), 2 x washers Ø8*Ø16*T1.5 (2). Fasten the inward-facing side as
shown on Figures A + B.
5.3
Use a wrench (28) to fasten the armrest on top with 1 x screw with interior
hexagon M8*20 (1), 1 x locking washer Ø10 (9) and 1 x curved washer
Ø8*Ø16*T1.5 (4). The components are shown in Figures C + D.
(11) Connector to armrests
1 x
(1) Screw with interior hexagon M8*20
6 x
(9) Locking washer Ø8
6 x
(2) Washer Ø8*Ø16*T1.5
4 x
(4) Curved washer Ø8*Ø19*T1.5
2 x
(28) Wrench for screws with interior hexagon
type Z
1 x
9
9
28
28
1
4
1
4
B
A
C
D
