13
(7) Screw M8*50
3 x
(2) Washer Ø8*Ø16*T1.5
1 x
(4) Curved washer Ø8*Ø19*1.5
2 x
(10) Plastic nut M8
3 x
27 (Socket wrench)
1 x
8.1
Insert the connector cord to the motherboard adapter (23) and connect the 2
x extension cords to the loudspeaker (21) via the hole (C) at the bottom of the
display connector (12) and pull it out in the middle by D (see Figure A).
8.2
Use 3 x screws M8*50 (7), 3 x plastic nuts M8 (10), 2 x curved washers
Ø8*Ø19*T1.5 (4) and 1 x washer Ø8*Ø16*T1.5 (2) to fasten the display panel (12)
to the armrest (11) (use the washer for the middle screw). Use the curved washers
for the screws on both sides as shown in Figure B. Fasten with a socket wrench
(27).
8.3
Insert the connecting cord to the motherboard adapter (23) in plug E in the most
distant end of the display and connect 2 x extension cords to the loudspeaker
(21) with 2 x exit cables to the loudspeaker (22) in the middle by D on the display
panel (see Figure A).
EN
EN
Step 8
Step 8
11
B
A
C
D
E
