manualshive.com logo in svg

Witschi ProofMaster, Руководство по эксплуатации

Поделиться
Скачать
Witschi ProofMaster Скачать руководство пользователя страница 62

Maintenance

 

 

62 / 96

17.10.2019

6

Maintenance

6.1

Safety during maintenance

Improper maintenance

 CAUTION

Risk of injury from compressed air!

If compressed air escapes uncontrolled, there is a risk of injury.

• Take care when working on the compressor or the compressed air

hoses.

Prohibition

Never force the device cover to open when the device is

under pressure!

Otherwise parts could be ejected.

Mandatory

Observe the documentation of the compressor

manufacturer!

To avoid operating errors that can lead to damage.

Short circuit

Caution - material

Danger of material damage due to short circuit!

Damage to the insulation on the power cord or the power supply unit

can result in a short circuit and damage the ProofMaster.

Prohibition

Never immerse the ProofMaster in water!

This will destroy the device.

Mandatory

Follow the obligations set out below:

Work on electronic components of the  

ProofMaster 

must only be

carried outby the customer service of  

Witschi Electronic AG!

Failure to comply with this requirement will void the warranty.

Place the power cord so that it cannot be damaged by external

influences.

This avoids the risk of damaging the power cord or power supply unit.
If any of the components are damaged, disconnect the mains plug and

have the power supply unit repaired.

Always disconnect the mains plug before cleaning, maintenance or

repair work!

Ensure that access to the power supply is always guaranteed.
To disconnect the power supply unit from the power supply, only pull on

the plug itself, never pull on the cable.

Protect live parts from moisture!

Moisture can cause a short circuit.

Содержание ProofMaster

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды