Witschi ProofMaster Скачать руководство пользователя страница 12

Страница: 12 / 96

Safety

12 / 96

17.10.2019

Moving parts

CAUTION

Risk of injury from moving parts!

Moving parts inside the device can cause serious injuries including loss

of limbs.

• Observe the following list of prohibitions and obligations.

Prohibition

Never open the device housing manually!

The housing may close again, trapping an object or part of the body.

Mandatory

Return a defective device to the manufacturer

immediately!

To avoid damage of any kind.

Risk of crushing

CAUTION

Risk of crushing when closing the bell cover!

There is a risk of crushing between the bell cover and the housing of the

device when closing the bell cover.

• Before closing the bell cover, make sure that no body parts or

objects are inside the closing area.

Current

Caution - material

Material damage due to short circuit!

Damage to the insulation on the power cord or the power supply unit

can result in a short circuit and damage the ProofMaster.

Prohibition

Never immerse the device in water!

It is not designed for immersion.

Mandatory

Follow the obligations set out below:

Work on electronic components of the ProofMaster must only be

carried out by customer service!

Failure to do so could void the warranty.

Always disconnect the mains plug before cleaning, maintenance or

repair work!

To avoid electric shock.

To disconnect the power supply unit from the power supply, only pull

on the plug itself, never pull on the cable.

To avoid damage to the cable.

Observe the following recommendations to avoid short circuits:

• If the power cord or power supply unit is damaged, disconnect the

mains plug and have the power supply unit repaired.

• Place the power cord so that it cannot be damaged by external

influences.

• Ensure that access to the power supply is always guaranteed.
• Protect live parts from moisture.

Содержание ProofMaster

































































































Результаты поиска

Содержание ProofMaster

Отзывы:

Бренды по названию

Популярные бренды

Witschi ProofMaster, Руководство по эксплуатации

Результаты поиска

Содержание ProofMaster

Отзывы:

Бренды по названию

Популярные бренды