Description
17.10.2019
27 / 96
Deformation sensor
1
2
3
4
6
7
5
1
Measuring probe
2
Sensor head
3
Scratch Protect
4
Support points
5
Support table
6
Sensor guides
7
Driving rods
The deformation sensor makes it possible to measure the deformation
of the watch. During the test, the watch is stabilised by the three
support points
4
that are integrated in the support table
5
. If a small
watch is being tested, the Scratch Protect
3
can be removed and the
watch support can be placed on it. The sensor head
2
with the
measuring probe
1
is located on the watch glass during the test and
can thus measure how strongly the watch housing expands or
contracts.
The sensor head
2
is raised or lowered automatically to the watch by
the drive rods
7
when the bell cover opens or closes.
Control and display ele-
ment
1
1
Touchscreen
Using the touchscreen, it is possible to navigate through the menus and
edit the test settings. It also shows the progress and results of the test.
4.2
Included accessories
Power supply unit
1
2
3
1
Power cable (country-specific)
2
Transformer
3
Electrical connection (device side)
Item no.: JA01-PSD40E120K3
The ProofMaster is connected to the mains via the power supply unit
with the following characteristic data:
Description
Unit
Value
Input voltage
VAC
100 to 240
Input current
A
1.0
Input frequency
Hz
50 to 60
Output voltage
VDC
12
Output current
A
3.0
