20
ACW-DINDxxx_UG_EN_V1.8
In the lower right corner, there is three buttons to set to default parameter the product configuration,
apply the configuration from the application to the device and load the configuration from the device
to the application.
The window below refers to a version with outputs, an ACW-DIND88:
In addition to the previous
page element, there is a tab “
Test outputs
” to pilot the outputs separately
or all at once.
Finally, the button
give an access to the output calendar configuration tools.
In addition to having access to all the parameters described in the "Parameterization" section, you have
access to a visualization on the state of the inputs, the meters and the temperature (if the sensor is
connected). The display of all these parameters is refreshed every 2 to 3 seconds. In versions with
outputs (DIND44 and DIND88), there is also the possibility of controlling the outputs.
