10
ACW-DINDxxx_UG_EN_V1.8
c.
Inputs and counters features
d.
Temperature sensor features
Optionally, a temperature sensor can be connected to the ACW-DINDxxx. The following ranges refer to
the sensor used. Be careful, the product has a smaller operating range than the sensor (see above).
e.
Meters back-up
Since version V1.2.0 the counters are saved in the memory of the ACW during several events:
⚫
When writing counters via the USB configurator
⚫
When writing via a downlink command
⚫
During a power failure
f.
Outputs calendar
From 1.4.0 firmware version, it is possible to program outputs state depending weekday and a time
window.
The possible configurable parameters are:
-
The start time (1 minute increment)
-
The stop time (1 minute increment)
-
The weekdays when the program is effective
-
Outputs to set
-
Outputs to reset
You can configure from 1 to seven programs and several programs can be used the same day.
Temperature
Range
-55°C / +125°C
Resolution
0,1°C
Precision between -10°C and 85°C
+/- 0,5°C
Precision entre -55°C and 125°C
+/- 2°C
Min.
Type
Max.
Inputs or meters frequency (Hz)
Condition:
- Cyclic report at 50%
- Filtering time 1 ms
400Hz
Bounces filtering time
1 ms
Note: Configurable value.
255 ms
Bounces filtering time precision
-1ms
Note: to guarantee a minimum 1ms of
filtering time, the filtering time must
be configured to 2ms.
0ms
Meters size
4 bytes
