Winmate R12FA3S-GSM2HB, Руководство пользователя

Страница: 65 / 76

USER MANUAL CHAPTER 5 MOUNTING
- 65 -
5.2 Safety Precautions
Observe the following common safety precautions before installing any electronic device:
• Use separate, non-intersecting paths to route power and networking wires. If
power wiring and device wiring paths must be crossed make sure the wires are
perpendicular at the intersection point.
• Keep the wires separated according to the interface. Wires that share similar
electrical characteristics must be bundled together.
• Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices in the
system.
5.3 Mounting Guide
G-WIN Slim IP65 (P-CAP) devices come with different mounting options suitable for most
of the industrial and commercial applications, including heavy duty and agricultural
vehicles, forklifts. The main mounting approach is VESA mounting - very user-friendly in
terms of installation. Refer to sub-sections below for more details.
CAUTION/ ATTENTION
Follow mounting instructions and use recommended mounting hardware
to avoid the risk of injury.
Suivez les instructions de montage et d'utilisation recommandé le
matériel de montage pour éviter le risque de blessure.