Fig. 8-5 The Default Floppy Disk Drive Settings
Hard Disk 1
The
Hard Disk 1
item will be automatically preset according to the disk drive type installed.
Normally you will select
Auto
and the BIOS will automatically detect which drive type is connected. This
is the default setting and will be applicable for most drive types.
Select
Standard
for a standard fixed disk type, and enter the relevant type number. The number of
cylinders, heads, etc. will be displayed according to the hard disk drive type selected.
Select
Custom
if your hard disk drive is a non-standard type. You may then manually enter the number
of Cylinders, Heads, etc. as appropriate for the hard disk installed.[SX/DX 8-5]
Fig. 8-6 Selecting Auto Hard Disk Type Detection
Hard Disk 2
3 of 4
3/2/99 12:51 PM
STANDARD SETTINGS SX/DX
file:///C|/test/HtmlHelp/TechhelpSTANDARD_SETTINGS_SXDX.html
