manualshive.com logo in svg

Winbook SX DX, Руководство пользователя

Поделиться
Скачать
Winbook SX DX Скачать руководство пользователя страница 47

THE PARALLEL PORT SX/DX

 

The parallel port is located behind the left-hand cover on the rear of your 486SX/DX-WinBook. To gain
access to the parallel port, open the hinged cover.[SX/DX 6-5] 

 

Fig. 6-4 Locating the Parallel Port

 

Parallel ports are often referred to as Centronics or Printer ports, since a printer is the device most
commonly connected to the parallel port. Again, this is an industry standard, so any device that requires a
parallel interface can be connected to the parallel port. In addition to printers, common parallel devices
include plotters and digitizers. 

Connecting a Printer

 

If you wish to connect a printer to your 486SX/DX-WinBook first make sure the printer is a parallel
printer and not a serial printer. The vast majorities of PC printers are parallel devices and can therefore be
connected to the parallel port on your 486SX/DX-WinBook. Provided with the printer should be a
printer cable. Connect the matching connector on this cable to your printer and secure it in place with the
screws or fasteners on the cable connector. Plug the other end of the cable onto the parallel connector on
your 486SX/DX-WinBook and secure it in place. And that is all it takes! 

Most printers do not require any software drivers and you should be able to access the printer
immediately without any further setup procedure. An easy way to test whether the printer is on line is to
turn on your 486SX/DX-WinBook and turn on the printer, and then, when your 486SX/DX-WinBook
has booted up, press the Prt Sc (Print Screen) key. This should cause the contents of the screen display to
be printed out. For details of your particular printer’s operation, please refer to the printer manual.
[SX/DX 6-6] 

 

1 of 1 3/2/99 12:42 PM

THE PARALLEL PORT SX/DX file:///C|/test/HtmlHelp/TechhelpTHE_PARALLEL_PORT_SXDX.html

Содержание SX DX
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды