Winbook FX, Руководство пользователя

Страница: 72 / 123

LCD
CRT
LCD & CRT
[FX 9-13]
NOTE: When you put the system in LCD & CRT mode, sometimes referred to as the Simulscan
mode, the display performance will slow slightly since the system has to update both screens at
the same time. There for, for maximum performance, use one display or the other unless you
really need to use both displays at the same time.
Memory Cache
This option allows you to enable an external memory cache. A memory cache improves system
performance by keeping frequently used computer instructions in memory with a faster access
time than DRAM.
To enable the WinBook FX’s memory cache, specify Enabled for this setting. The default value
for this field is
Enabled .
The only time you might want to disable the cache is under the following conditions:
Operating the WinBook FX at high speed with cache enabled causes problems
(instability and incompatibility with other operating systems, etc.).
A program’s documentation specifies that you must disable the computer’s memory
cache.
Note that a memory cache is different from a disk cache. A disk cache is used to speed up access
to the disk drives; whereas, a memory cache is used to speed up accesses to DRAM.[FX 9-14]
Boot Sequence
This field allows you to set the booting sequence of the WinBook FX. You can choose one of the
3 settings below. The default value for this field is
A: then C: .
A: then C:
When "A: then C:" is specified, the system will attempt to boot from drive A: first. If
drive A: is empty or a non-system floppy disk is present in the floppy drive, the
system will boot from the C: drive.
C: then A:
When "C: then A:" is specified, the system will attempt to boot from the C: drive
first.
C: only
When "C: only" is specified, the system will attempt to boot from the C: drive only.
CD-ROM