COLORED DOTS
I see colored dots on my WinBook FX’s display all the time.
Some colored dots will appear on your screen as an inevitable part of the TFT display screen
process. WinBook FX quality standards aim to ensure that these colored dots do not obscure
or distract from the view of the display image. If you feel colored dots on your display are a
problem, or that the number of them is increasing, please call the Technical Support number
listed on the WinBook FX "Read-Me-First" card.[FX 10-32]
BRIGHTNESS POOR
Display brightness is poor.
Check the brightness settings. Press <Fn> + <4> to increase brightness, <Fn> + <3> to
decrease brightness.
You may have the Auto Dim function enabled. With this enabled, the screen will dim slightly
to save power whenever you are running off the battery. You can disable this from the Setup
Program Power Savings menu (see Chapter 9 for details).
If the brightness control is set at maximum, the backlight may need replacing. Call the
Technical Support number listed on the WinBook FX "Read-Me-First" card.
SCREEN BLANKS TOO QUICKLY
My WinBook FX’s screen blanks too quickly.
You may have selected a screen saver in Windows 95. Adjust the length of time between
your last activity and the time the screen blanks.
You may have selected a timeout feature in the Setup Program. Adjust the length of time
between your last activity and the time the screen blanks. See "Check Setup Program
Settings" under Fast Fixes). In the Setup Program, go to the
Power Savings
menu and adjust
the
Video Timeout
setting.
You may have the Auto Dim function enabled. This will cause the screen to dim slightly to
save power whenever you are running on battery power. You can disable this from the Setup
Program Power Savings menu. See Chapter 9,
Setup Program
, for details.
EXTERNAL MONITOR DOESN’T WORK
My external monitor doesn’t work.
Make sure the monitor is connected and turned on, and that you plugged in the monitor
before
you powered up the WinBook FX.[FX 10-33]
Check that the AC power cord for the external monitor is connected to the monitor and
connected to the electrical outlet.
Check that the power switch for the external monitor is turned on.
Make sure the WinBook FX’s LCD/CRT function is switched to CRT or LCD & CRT. Use
the <Fn> + <F12> key combinations.
If you close the display of the WinBook FX, the display controller automatically deactivated
the LCD display and activated the external monitor port. The purpose is to provide support
Содержание FX
Страница 26: ...FX Chapter 3 ...
Страница 123: ......